v1.0.5 :

• Added: 'DAW Play' switch in the MIDI bar, with a shortcut in the footer - when on, starting the DAW starts the loaded MIDI clip in time with the DAW position, and stopping it stops the clip. Requires Sync To Host; off by default and kept across presets
• Changed: Starting the DAW no longer restarts a clip just because it was played in the plugin before - turn on DAW Play for that
• Changed: Factory kit presets reworked and rebalanced to a new output level; 'Impact Kit' is now 'Nasty Kit' (Hybrid Kits) and 'Impact Full' is now 'The Pact' (Dub Hop Kits)
• Changed: Factory channel and FX presets updated - Room and Reverb presets now include the IR Stretch
• Changed: A new instance now starts on 'Modern Bright Kit'
• Improved: MIDI bar layout, and new look for the Sync To Host and DAW Play buttons
• Improved: Selected mixer channels are now shaded instead of outlined
• Fixed: With Sync to Host on and the DAW playing, a MIDI clip started from the loop start instead of the DAW position, and the plugin did not always take the DAW tempo at launch
• Fixed: With Sync to Host off, loading a kit preset kept the previous MIDI clip's tempo instead of the tempo of the preset's clip
• Fixed: Room and Reverb FX presets did not save the IR Stretch setting
• Fixed: Loading a kit preset left the Room, Delay and Reverb preset menus (and their macro menus) on the previous selection - they now show the kit's FX preset, its category included

v1.0.4 :

• Improved: Lower memory use - about 200 MB less per plugin instance
• Improved: Faster plugin loading
• Fixed: Audio Unit (Logic Pro) - the interface could take more than 30 seconds to open, and kept the CPU busy for a while after it appeared

v1.0.3 :

• Added: 'Edit Output Names' window - Confirm and Cancel buttons. Names only change when you click Confirm; Cancel, or a click outside the window, closes it and leaves everything as it was
• Added: Windows installer - optional AAX plugin (Pro Tools), removal of earlier Dread Drumz installations and of the old, emptied factory preset folders
• Improved: Output names longer than the mixer output menu are shortened with '...' (names of up to 8 characters are always shown whole), and the menu's tooltip shows the full name
• Improved: The text of the About panel follows the chosen interface font
• Fixed: The factory 'Default' routing could be overwritten, or another routing renamed over it - this is now refused with a message

v1.0.2 :

• Improved: Undo / Redo now also steps back through sampler, EQ, drum page, macro and MIDI player changes, and through channel and FX preset loads (history clears when a kit preset loads)
• Fixed: Loading a kit preset left the A/B sampler balance and the disabled samplers of every channel but the selected one as the previous kit had them
• Fixed: The sampler 'Fine' knob always showed 0 after switching channel, and the next 'Tune' move (or a linked one) erased the fine tuning

v1.0.1 :

• Added: Undo / Redo buttons next to Settings - step back through mixer and FX changes (history clears when a preset loads)
• Added: Custom names for the external outputs - the name also shows on the DAW's multi-out tracks (VST3)
• Added: Edit several mixer channels at once - Cmd/Ctrl + click a channel strip to add it to the selection, Shift + click to select a range. Volume, pan, sends, Solo, Mute and output then move together
• Added: 'Multi-channel edit' setting (Controls tab) - selected channels move by the same amount (Relative) or all take the same value (Absolute)
• Added: Cmd/Ctrl + click on a channel's BP button keeps only that channel running (click again to bring every channel back)
• Added: Rename and delete your own channel presets, FX presets, routing setups and MIDI maps
• Added: Choice of interface font in the settings, each available in a normal and a larger size
• Added: Controls tab in the settings - pick the mouse gestures for value entry, fine tune and reset on every knob
• Added: The pad of the selected channel is now outlined on the drums page
• Added: Offline authorization route when the machine ID has changed (new computer, OS reinstall)
• Improved: Lower CPU use - idle reverbs, delay and spectrum analysers now rest when nothing plays
• Improved: Room and Reverb IR 'Stretch' knobs now show the length ratio (x0.5 to x2.0)
• Improved: The Kick can now play more than two overlapping hits
• Improved: The preset browser marks the loaded kit's group and keeps 'Show Favorites' lit while it filters the list
• Improved: Flams follow the kit's velocity curve - the strike sets the level, the following hits fade out smoothly
• Improved: The MIDI loops browser shows the full loop names
• Improved: A machine ID mismatch is now distinguished from a corrupted keyfile
• Changed: OpenGL is no longer used on macOS, and is an opt-in setting on Windows
• Fixed: The Kick could stay silent after reloading a project
• Fixed: The Kick's randomizer had no effect
• Fixed: Output pairs 9 to 24 were silent
• Fixed: Split sampler outputs (Kick, Sidestick, Snare) did not route correctly, or could not reach outputs above pair 8
• Fixed: Sync to Host - tempo followed a stale DAW value, and the loop now stops with the DAW even when Sync to Host is off
• Fixed: The MIDI loops kept following the DAW transport with the plugin window closed
• Fixed: Delay sync times did not match the note value shown on the knob
• Fixed: Dragging a MIDI loop into the DAW exported the selected loop instead of the hovered one, without the active MIDI map
• Fixed: A loop could play the wrong drums after changing the MIDI map
• Fixed: Saving a MIDI map under an existing name could create a duplicate instead of asking to overwrite
• Fixed: A new instance showed one default kit and loaded another
• Fixed: The Samples Browser list did not follow a preset change, and lost the loaded sample's group
• Fixed: Switching a channel off and on with BP re-enabled a sampler you had turned off
• Fixed: Routing setups could not be saved or listed when the routing file was damaged
• Fixed: The mixer channel play button was hidden behind a grey block
• Fixed: Offline authorization - the request file was not written nor displayed
• Fixed: Activation panel layout and drop area

v1.0.0 :

• Added: The MIDI clips transport now follows the DAW transport (host play/stop) when 'Sync to Host' is enabled
• Added: Channel FX filter peak level control
• Changed: 'Sync to Host' is now a global setting instead of being saved in each preset
• Improved: The mixer Solo/Mute has been completely rewritten and the Send FX channels decoupled - soloing a drum no longer kills the reverb/delay tails, and moving a muted channel's fader no longer un-mutes it
• Improved: Faster preset loading - sample maps are now loaded in a single batch
• Fixed: The master Width knob was acting on the Room balance
• Fixed: Split sampler outputs were lost after loading a sample map
• Fixed: Missing peak level values in the channel presets
• Fixed: The Samples Browser could stay open when changing preset from the Preset Browser
• Fixed: Drum pads tooltips
• Misc: Large internal cleanup (dead code and debug traces removed)

v0.9.9f :

• Fixed: The authorization process was broken by the notification system call
• Added: New presets
• Fixed: A GUI glitch occurring in Logic

v0.9.9e :

• Improved: All factory presets re-levelled (volumes and Send FX amounts)
• Changed: IR Room & Reverb levels set to -6dB, Send FX default level set to 0.0dB
• Fixed: Restored the legacy activation flow
• Fixed: Removed a duplicate Room::Kick Enhancer preset

v0.9.9d :

• Added: MIDI settings panel
• Fixed: A crash occurring when changing presets quickly while playing
• Fixed: The Send FX panel was not showing when clicking on the Send FX controls
• Fixed: The sampler enable state was not refreshed when selecting a channel
• Fixed: FX presets writing bug
• Improved: Channel presets volume and pan values have been normalized

v0.9.9c :

• Added: Compressors gain reduction display now works on all platforms
• Improved: Channel & FX preset files are now version-checked before being updated
• Fixed: MIDI drag & drop not working - a default preset is now loaded when opening the plugin
• Fixed: MIDI clips not being sorted, MIDI filter menus, missing MIDI data, Favorite icon not clickable
• Fixed: The 'PHASER MIX' knob was not broadcasting its value
• Fixed: An XML parsing error occurring on load
• Fixed: Channel presets list population, channels output routing, global filters
• Fixed: Samples Browser container bug and menu display glitch
• Improved: Cleaned DSP networks and removed unused files

v0.9.9b :

• Correção da falha na entrada MIDI
• Tentativa de corrigir as permissões de escrita de ficheiros MacOS durante a instalação do plug-in

v0.9.9a :

• Corrigido um pequeno atraso introduzido pela anterior correção do erro de áudio

v0.9.9 :

• Correção de um estouro de áudio que ocorria em algumas configurações
• The send FX signal handling has been completely rewritten

v0.9.8b :

• Reamostragem de um novo timbale para substituir um antigo
• Adicionado outro lote de loops MIDI
• Correção de algumas peculiaridades em alguns loops MIDI

v0.9.7b :

• Módulo de saturação atualizado
• Adicionadas algumas predefinições e loops MIDI
• Adicionadas imagens de pacotes MIDI
• Ficheiros de dados actualizados e limpos
• Corrigido o parâmetro de entrada do acionamento dos canais do tom
• Fixed HHats and Ride naming issue
• Fixed a glitch on the samples tags display
• Corrigida uma falha no ecrã do navegador de predefinições
• Corrigida a falha na etiqueta do canal Claps/Timbales/Snares

v0.9.7a :

• Adicionados os botões On/Off dos módulos Send FX
• Corrigido: Uma falha que ocorria ao usar o Navegador de Amostras
• Fixed: A glitch occurring on the Samples tags wrapper
• Corrigido: Falha na validação da UA
• Diversos: Limpeza interna

v0.9.7 :

• Adicionado: Os samplers Kick, Sidestick e Snare podem agora ser separados e encaminhados para saídas externas
• Adicionada: A capacidade de guardar a configuração atual de encaminhamento de canais e carregar configurações de encaminhamento guardadas anteriormente, utilizando um menu
• Adicionado: Mais controlos para ajustar o módulo Phaser do Reverb
• Improved: The 'Humanizer' parameters will no longer act on the highest velocity values (to prevent softening an intended strong hit)
• Melhorado: O painel e os controlos das Definições foram refactorados
• Melhorado: Pequenos ajustes de design
• Corrigido: A tecla ALT HiHat Closed não estava a bloquear corretamente o chapéu aberto
• Corrigido: falha gráfica nos botões de categoria do navegador de amostras
• Corrigido: Problema de validação lógica
• Corrigido: As sequências de Flam estavam ligadas ao tempo do anfitrião

v0.9.6 :

• Adicionado: Navegador de amostras
• Adicionado: parâmetro Phase adicionado ao Reverb (pré-reverb)
• Added: Non-acoustic drum sounds have been properly named
• Adicionado: O nome dos Drum Presets é agora apresentado no Sampler
• Adicionada: opção de carregamento automático de elementos de microfones duplos no Navegador de Amostras
• Adicionado: Os canais não utilizados podem agora ser desactivados
• Improved: Some samples have been cut and phase-aligned again
• Melhorado: Largura do estéreo do atraso
• Melhorado: Melhorias no desempenho da luz
• Changed: The Sidestick and Snare TOP & BTM elements have been re-ordered. Now the TOP mics appear in the list before the BTM mics
• Corrigido: Os botões Solo e Mudo por vezes não eram chamados corretamente
• Corrigido: As pastas da categoria Predefinições não estavam corretamente localizadas no painel Guardar rapidamente
• Corrigido: Várias falhas de MIDI (flam, velocity, mapping)
• Corrigido: Autorização offline
• Corrigido: Falhas no envelope
• Corrigido: Guardar ficheiros de predefinições de bateria
• Corrigido: Os clips MIDI não se aproximavam do tempo quando eram reproduzidos no Browser MIDI

v0.9.5a :

• Corrigido: A tecla HiHat Pedal não estava a bloquear o Open HiHat
• Corrigido: A função de abafamento do Open HiHat não era actualizada corretamente quando se alterava o mapeamento MIDI
• Fixed: The Cymbals choking function wasn't updated properly when changing the MIDI mapping
• Corrigido: Os Kick Presets não eram instalados corretamente

v0.9.5 :

• Fixed: An authorization glitch that had been introduced in the previous update
• Fixed: Wrong data files versions in the previous installer on MacOS
• Melhorado: Tratamento de ficheiros externos
• Alterado: Imagens de Midi Packs

v0.9.4 :

• Adicionado: dicas de ferramentas! (Ativar com o botão 'i' no canto inferior esquerdo)
• Adicionado: Sistema de notificação (deteção automática de actualizações)
• Adicionado: opção predefinida "Guardar rapidamente" na barra superior
• Adicionado: accionadores de notas alternativos para as baterias principais (caixa, timbale, toms, ...)
• Adicionado: Controlo da curva de decaimento do envelope AMP da bateria
• Adicionado: elementos de caixa de bateria ao canal Timbale/Clap
• Removed: Drums AMP envelope Release controls as it was useless (in a one-shot sampler mode)
• Melhorado: (QoL) Os ficheiros MIDI que pertencem ao mesmo Riddim estão agora agrupados visualmente
• Melhorado: Manuseamento das articulações de Flams
• Melhorado: Manuseamento de versões de predefinições de bateria e FX
• Corrigido: Agora o mapeamento MIDI é guardado entre predefinições, e os ficheiros MIDI da biblioteca podem ser exportados com um mapeamento modificado
• Fixed: MIDI Map file bug that led to triggering the wrong drum elements
• Corrigido: O estrangulamento do prato não funciona com vários golpes
• Fixed: Preventing Samples link file sometimes not being properly copied on MacOS
• Corrigido: Pequenas falhas de GUI

v0.9.3 :

• Added: Button in the Settings panel to open the user guide
• Melhorado: Desempenhos globais
• Corrigido: Bug no navegador do Pacote MIDI
• Fixed: Delay FX buttons bug
• Corrigido: Imagem em falta na bateria da página principal
• Corrigido: O pitch dos canais não estava a recuperar os valores definidos

v0.9.2 :

• Adicionado: A configuração do Output Routing é guardada ao guardar um projeto DAW E ao navegar pelas predefinições
• Adicionado: Um botão para ligar os pitches do sampler
• Adicionado: Se o botão de reprodução MIDI interno estiver ativado, os clips MIDI continuam a ser reproduzidos
• Adicionado: Clicar no botão "Reproduzir" num canal do misturador seleciona esse canal
• Corrigido: A configuração do Output Routing não era recuperada no carregamento do projeto
• Corrigido: Vários controlos do Sampler não eram corretamente chamados quando se mudavam as predefinições
• Corrigido: O estado do botão "Sync to Host" já não é guardado na predefinição
• Atualizado: ficheiros predefinidos
• Atualizado: Ficheiro de definições do MidiMap

v0.9.1 :

• Adicionado: Saídas externas para envio de FX
• Adicionado: Gatilhos alternativos para a tarola e os timbales (permite tocar os rolos mais facilmente em MIDI KB)
• Correção: Os nomes das saídas nos menus de saída estão agora corretos
• Correção: As saídas externas não estavam a funcionar a partir do 12º canal de saída
• Correção: A opção OpenGL aparece agora no painel Definições (ativa a opção se tiveres uma GUI lenta)
• Correção: Foram corrigidos alguns nomes e detalhes de loops MIDI
• Pequenas alterações internas
• Pequenas optimizações de desempenho